Power Quality Mastery – Foundation Training

Build a practical foundation in power quality with Agulhas Utilities Corporation. This basic-level course introduces electrical disturbances, harmonics, three-phase unbalance and the interpretation of measurement records.

Six introductory learning modules.
Guided, illustrative examples and an evidence-first approach.
For technical, maintenance and facilities teams.
Delivery, duration, fees and inclusions confirmed by quotation.

Enquire about foundation training →

SKU: PQM-FOUNDATION-TRAINING Categories: Power Quality Consulting Services, Training Tags: Electrical Training, Harmonics, Maintenance Training, Power Quality Fundamentals, Power Quality Monitoring, Power Quality Training, South Africa, Voltage unbalance

Description
Additional information

Agulhas Utilities Corporation / Foundation training

Power QualityMastery starts
with the basics.

Understand the disturbance. Read the evidence. Ask better engineering questions.

A practical introduction to power quality for technical teams, maintenance personnel and facilities decision-makers. Build a clear foundation before progressing to specialist analysis.

Basic-level courseSix learning modulesSouth African context

Enquire about this course ↗Explore the curriculum ↓

THE POWER QUALITY FOUNDATION● LEARN / OBSERVE

● Understand● Interpret● Investigate

Conceptual three-phase illustration only. Not measured data, a compliance assessment or a fault simulation.

Start with the essentialsNo advanced sequence calculations required

Learn a structured approachObservation before attribution

Plan your next stepKnow when specialist support is needed

Your learning pathway

Six building blocks.
A clearer electrical picture.

A proposed foundation syllabus that connects everyday operating questions with the language of power quality. Final emphasis is agreed before booking.

Electrical foundations

Build a working vocabulary for voltage, current, frequency, RMS values and three-phase systems. Keep line-to-line and phase-to-neutral quantities distinct.

Recognise the disturbance

Meet voltage dips, swells, interruptions, transients and frequency variations. Practise describing an event without jumping to a cause.

Harmonics & power factor

Explore fundamental and harmonic components, voltage and current distortion, and an introductory distinction between power factor and distortion.

Three-phase unbalance

Introduce voltage and current unbalance, negative and zero sequence, and why a magnitude-deviation index is not the same as a sequence-based measure.

Read the measurement

Work through illustrative waveforms, RMS trends and event logs. Identify measurement location, instrument suitability, capture settings and reporting intervals.

From evidence to action

Organise observations, test alternative explanations and decide what further investigation is needed. Introduce mitigation categories without prescribing a universal fix.

Learning emphasis: distinguish voltage from current, fundamental sequence components from harmonics, and supply-quality assessment from equipment protection. This is an introductory course, not an authorisation to perform live electrical work.

Built for practical understanding

Less guesswork.
Better-informed conversations.

The course is designed to help participants explain what was observed, identify what the available records do not establish, and prepare a more useful request for investigation.

Examples are educational and explicitly labelled. Training does not establish the cause of a disturbance at your site or guarantee equipment reliability.

Learning outcomes

Recognise the principal categories of power quality disturbance.
Describe basic waveform, trend and event-log information.
Identify missing measurement and operating context.
Separate an observation from a hypothesis or a confirmed diagnosis.
Prepare a concise issue brief for an engineering specialist.
Understand why the applicable standard, equipment duty and supply agreement must be checked separately.

A guided learning exercise

Turn an event report into
a better investigation question.

Work through a hypothetical equipment-trip scenario. The aim is a disciplined enquiry—not a premature verdict.

STEP 01 / OBSERVE

What happened?

Record the equipment response, reported time and operating condition.

STEP 02 / READ

What was captured?

Review the illustrative event log, measurement point and settings.

STEP 03 / QUESTION

What is still unknown?

List missing records and competing explanations without assigning blame.

STEP 04 / BRIEF

What comes next?

Draft a focused request for specialist assessment or further measurement.

Proposed educational exercise. Not a documented customer incident or a site-specific engineering conclusion.

Who this course is for

A common language
for your technical team.

Suitable as an introduction for electrical technicians, maintenance teams, facilities personnel, junior engineers and operational managers who engage with electrical performance issues.

Basic familiarity with electrical systems is helpful. Advanced power-system modelling is outside the proposed foundation scope.

Discuss during scoping: facilitator-led explanations, worked examples, a participant reference pack and a knowledge check. Inclusions are confirmed in the written quotation.

Course arrangements

Level: Basic / foundation
Delivery: Online or on-site options to be agreed
Duration: Confirmed after training needs are reviewed
Dates: By arrangement; subject to availability
Group size: Agreed in the quotation
Fee: Request a quotation; no published course fee
CPD status: No CPD accreditation is claimed for this foundation course

Before you book

Clear scope. Clear expectations.

Is this an advanced diagnostic masterclass?

No. This is a new basic-level course designed to establish terminology, measurement literacy and a structured approach to asking technical questions. Advanced modelling, protection-setting design and specialist mitigation design are outside its proposed scope.

Does the course include a site power quality survey?

No site survey, instrument installation, live measurements, site-specific compliance report or electrical remedial work is included unless separately scoped and quoted.

Will the course certify our installation as compliant?

No. Training is not a compliance assessment, legal opinion, competency authorisation or guarantee of equipment performance. Applicable South African requirements and relevant international standards are introduced as context; their editions and applicability must be checked for each actual assessment.

Is a certificate or CPD credit included?

No CPD points, formal qualification or accredited certification are promised. Ask about any attendance record and its conditions when requesting a quotation.

How do booking, payment and cancellation work?

Submit an enquiry with your team size, preferred dates, delivery location or online preference, and learning priorities. Fees, taxes, travel where applicable, payment arrangements and booking or cancellation conditions must be confirmed in writing before acceptance. An enquiry alone does not reserve a training date.

Build the foundation first

Give your team the language
to understand power quality.

Tell us who will attend, what they need to understand and how you would like the training delivered. We will use that brief to scope the appropriate foundation course.

Request a training quotation ↗Email your training brief

Enquiry-based training • Scope and availability confirmed before booking